New: profitability calculator for small manure biogas plants Try it →
bioenergyfarm.eu

Agri-PV on the Farm: Funding, Permits and Costs in Germany

Updated: 16 November 2026

Agri-PV (also agrivoltaics) is the simultaneous use of one area for farming and solar power. It pays off mainly when a farm wants to use the electricity itself or feed in extra without taking cropland out of production. In law it is covered by the special solar plants of the Renewable Energy Sources Act (Erneuerbare-Energien-Gesetz, EEG) and by the outdoor-area privilege in section 35 of the Building Code (Baugesetzbuch, BauGB). The details below follow the statutes as of November 2026. Funding values and ordinances change, so always plan with the figures valid on the day.

What Agri-PV Means on a Farm

With agri-PV the land stays in agricultural use. Panels are either mounted high enough for machinery to pass beneath them or set up as vertical rows between the crops. The standard DIN SPEC 91434 distinguishes two categories: in category I the area below the panels remains usable, in category II the panels stand between cultivated strips, for example as a low-mounted system.

Fraunhofer ISE reports electricity generation costs between 7 and 12 euro cents per kWh in its guide and lists extra income and lower water use as possible benefits (Fraunhofer ISE, agri-PV, German). Whether a specific plant pays off depends on crop, mounting, grid connection and self-consumption.

Funding Under the EEG

The EEG calls agri-PV special solar plants. Under section 48(1) sentence 1 no. 5 EEG (German) these include:

  • arable land with simultaneous crop cultivation (no peat soils, no nature reserves or national parks)
  • land with perennial crops
  • permanent grassland with simultaneous agricultural use, outside Natura 2000 sites
  • car parks, rewetted peatlands and certain artificial water bodies

The technical requirements are set by the Federal Network Agency in a determination under section 85c EEG. For elevated plants on arable land, perennial crops and grassland, section 48(1b) EEG provides an increase of the reference value if the clearance height is at least 2.10 metres, or at least 0.80 metres for exclusively vertical panels. Plants above 1 megawatt go into the Federal Network Agency’s auctions, and the reference value then follows the award.

The actual cent values change with auction results and legal amendments. Give your grid operator and planner the planned size and have the currently valid value confirmed. How payments work for biogas is explained in the guide to EEG feed-in tariffs for biogas.

Other Funding and Financing

Development loans are possible on top of the EEG. Landwirtschaftliche Rentenbank supports renewable energy in agriculture with its programme “Energie vom Land”, applied for through your own bank. Eligible plant types and terms are listed in the bank’s programme documents. For an overview of federal and state schemes see the guide to funding for farm biogas and bioenergy. The basic rules apply here too: apply before the project starts, clarify cumulation, observe the commitment period.

Some federal states support pilot projects or feasibility studies for agri-PV. Ask the chamber of agriculture or the state office about the current situation.

Permits and Planning Law

In the outdoor area a project is only allowed if it is privileged or does not conflict with public interests. Section 35(1) no. 9 BauGB (German) privileges special solar plants within the meaning of the EEG if

  1. they are in a spatial and functional relationship with a farming, forestry or horticultural business,
  2. their footprint is at most 25,000 square metres (2.5 hectares), and
  3. only one such plant is operated per farmstead or business location.

The law also requires a commitment to remove the plant and unseal the soil once use has permanently ended. Permit authorities often secure this with a land charge. The privilege replaces neither the building permit nor the check of public interests such as landscape and nature conservation. Larger plants outside these limits usually need a local development plan from the municipality.

Costs and Profitability

Reliable prices per kilowatt for agri-PV require a quotation because the range is wide. These factors drive cost:

Factor Effect
Mounting (high or vertical) High frames for machinery passage cost more than low systems
Grid connection Distance to the substation and transformer often decide profitability
Crop and tillage Row spacing and panel height must fit your machinery
Self-consumption Power for barns, cooling or drying is worth more than feed-in
Removal and land adjustment Plan for removal security and yield changes beneath panels

Treat self-consumption and feed-in separately: self-consumption saves the purchase price, feed-in earns the EEG value. Use your own current figures for both, not averages from the internet. Also allow for yield changes: under panels, growth can fall or, in dry years, rise depending on the crop. Test plots and the chamber of agriculture give robust values for your crop.

Agri-PV Alongside Biogas and Wood Energy

A farm with a biogas plant can combine solar power and CHP: the PV plant delivers by day, the CHP runs on demand, and the heat goes to barn, house or drying (see heat use from biogas). Solar power also suits a wood heating system on the farm, since the boiler needs little electricity. Check early whether grid capacity and metering suffice for both generators, and run the whole concept through the profitability of biogas.

This portal’s provider directory lists biogas, service and wood energy businesses, not PV installers. For agri-PV, contact specialised planners and your chamber of agriculture.

The Route to a Plant in Six Steps

  1. Fix area and crop, and estimate self-consumption and feed-in.
  2. Clarify connection point and capacity with the grid operator.
  3. Ask the building and nature conservation authorities whether the section 35 privilege applies.
  4. Ask your approval body how the area is treated for area payments.
  5. Collect quotations and calculate profitability with your own figures.
  6. Apply for finance and a development loan through your bank before signing contracts.

Frequently asked questions

What is agri-PV?

Agri-PV means producing food or feed and solar power on the same land. Panels stand high above the crops, between rows of plants or as vertical fences. Agriculture must remain the primary use.

Is there funding for agri-PV in Germany?

Yes, mainly through the EEG. Special solar plants under section 48 EEG receive a payment or an auction award, and elevated plants that meet minimum heights get an additional increase. Development loans through your own bank, for example from Landwirtschaftliche Rentenbank, are also possible. Values change, so check them when you plan.

Do I need a building permit for agri-PV?

As a rule, yes. In the outdoor area, agri-PV is privileged under section 35(1) no. 9 BauGB if conditions are met, but that does not replace the building permit. Larger plants or those outside the privilege usually need a local development plan.

Do I lose area payments if panels stand on my field?

Whether and how far the land still counts as agricultural area is set by CAP rules and the state authorities. Clarify it in writing with your approval body before you sign a contract.

Does agri-PV fit with a biogas plant?

Yes, as a complement. Solar power covers daytime peaks and the farm's own demand, while the CHP unit supplies power and heat on demand. Plan the grid connection and metering together.

Calculator

How much power and revenue could your livestock deliver? Run the numbers with open assumptions.

Open the biogas calculator